MEASURED 33-INCH FIREBOX:The fireplace measures approximately 33.9"W × 26.6"H × 9.8"D, providing clear dimensions for planning a compatible mantel, fireplace cabinet, or media console opening. Designed for rear installation; measure the finished opening and allow room around the ventilation areas before purchase.
1400W SUPPLEMENTAL WARMTH:The 120V, 1400W heater adds targeted warmth to indoor living areas without presenting the unit as a primary home heating system. Adjust the thermostat from 62°F to 82°F to match changing room conditions and personal comfort preferences.
CUSTOMIZABLE FLAME AND LOG DISPLAY:Cycle through multiple flame levels to adjust the visual intensity, or turn off the flame while keeping the glowing log effect visible. The flame display can also operate without the heater, allowing the firebox appearance to be used during warmer seasons.
DAILY AND WEEKLY SCHEDULING:Select a countdown from 30 minutes to 6 hours for individual use sessions. The programmable weekly timer supports scheduled operating periods across multiple days, helping coordinate the fireplace with morning, evening, or weekend routines.
REMOTE AND ON-UNIT CONTROLS:Use the included remote or the top-right control panel to manage power, heat, flame, temperature, and timer settings. An internal temperature-limiting function is designed to pause heating if the unit becomes too warm; keep the air inlet and outlet unobstructed during operation.
B0FZTDMLJ6
All orders are processed within 1-2 business days if the stock is available.
If we are out of stock on certain items, shipments may be delayed by a few days. In this case, we will contact you via email or telephone.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return label to Amazon.
All our products purchased from Amazon and MegaWise official store are covered by a 1-year warranty, starting from the date of purchase.
Frequently ask questions
Our 1500A is suitable for petrol engines up to 7L and diesel engines up to 5L. While the 2500 A is suitable for petrol engines up to 8L and diesel engines up to 8L.
1. Turn on your jump starter and ensure it has a charge of over 50%. (Charge fully before initial use). 2. Insert jumper cables into the jumping port. The digital display will light up. 3.Connet the red clamp to the positive(+) terminal and the black clamp to the negative(-) terminal of the car battery. 4. Start your engine.
To determine if the unit is charging, you can check the indicator lights. The 4 indicator lights should be flashing.
1. Plug the cable of your cell phone or tablet into one of the two USB charging ports. 2. Press the power button.
Press and hold the power button for 2 sec to turn on the LED flashlight, and short-press to switch modes(high/SOS/strobe). Press and hold for 2 seconds again to turn it off.
There are 4 red LED lights, if all are lit the unit is charged.